Video: Aprilaire 10 Product Info & Installation

Video featuring products available on AprilAireParts.com .
Credit Cards Accepted Support Cart
Need Assistance? Live Chat 800-825-2148
 

Video Home » Aprilaire 10 Product Info & Installation


Rate this video
  • 5.0/5 (1 vote)
Plays:
Length: 2:58
embed

I’m Jay, and this is the Aprilaire 10 water panel evaporator pad, also known as a humidifier filter. Detailed instructions are located on the back of the box.

The water panel is located on the inside of your humidifier, installed within the pad frame, with a color mark on top. It acts like a sponge, holding water which moisturizes the dry air in your home, reducing the negative effects of over-dry air: such as allergy and asthma symptoms, dry nose, itchy skin, cracked/warped wood floors or furniture, and static shocks.

It’s coated with nontoxic material, designed to assist with the even distribution of water. Over the course of the heating season, minerals build up on the pad, restricting the flow of air and water, reducing its efficiency, and possibly causing water to leak into your furnace. Because of its special coating, it is not cleanable. It must be replaced a minimum of once per season.

Replacement is easy. Here’s how.
Be sure to turn the power off before performing any maintenance.
Before performing this service, it is necessary to shut off the water. Find the saddle valve, turn it clockwise until it stops.

These components are common to most Aprilaire humidifiers. The parts in your model may look slightly different, but the assembly procedure is similar. The plastic components should be washed using mild soap and water prior to replacing the water panel. The panel must be replaced annually.

On the back of the box are clearly printed instructions for your model. The spray paint mark indicates the top. Let’s slide this together. You’ll notice notches. These notches line up with the tabs on the distribution tray. Snap that together.

Now the assembly is complete. This side here with a little hole in it will go towards the inside of the humidifier, and this side will go towards the furnace or ductwork.

This is the other style scale control insert. It’s a complete square, and this is the distribution tray that matches it. It assembles similar to the last one. It snaps together, and this is now completed. On this side of it, you’ll notice a little loop. That part goes towards the humidifier; this side goes towards the furnace or ductwork.

Thank you for watching. For this and other products, visit us at aprilaireparts.com.


+
4:21
Plays: 68
Length: 4:21
+
4:25
Plays: 50
Length: 4:25
+
3:43
+
2:35
Plays: 329
Length: 2:35
+
11:05



» Be first to receive the latest updates!
Add to My Yahoo!My GoogleMy AOL
BloglinesNewsgatorNetvibes.



Copyright | On Time Mall Inc. | All Rights Reserved | 800-825-2148